Disclaimer
These press releases may contain certain forward-looking statements that are subject to known and unknown risks and uncertainties that could cause actual results to differ materially from those expressed or implied by such statements. Such risks and uncertainties include, but are not limited to the risk factors noted in the press releases and Tenneco's filings with the Securities and Exchange Commission on Form 10-K and Form 10-Q. All press releases are current only as of the date specified. Tenneco disclaims any obligation to update or correct press releases as the result of financial, business or any other developments occurring after the specified date.
2019
Lake Forest, Illinois, September 20, 2007 – Tenneco Inc. (NYSE: TEN) announced today its intention to close its Wissembourg, France manufacturing facility, which produces emission control products for original equipment manufacturers. The company will consult with work councils and local government authorities on the intended closure and potential impact of this announcement on the approximately 180 people employed at the facility.
Tenneco continues to look for opportunities to improve operating efficiency and optimize its global manufacturing footprint by matching production capacity to customer demand. The intended closure of the Wissembourg facility is designed to reduce production overcapacity in the region.
The company will implement any potential workforce reductions that may occur as a result of this plan in compliance with all applicable legal and contractual requirements including consulting with work councils and other employee representatives.
The potential closure is dependent on discussions with employee work councils and, if completed, Tenneco expects it would take up to a $17 million restructuring charge, beginning as early as the fourth quarter 2007 and through 2008.
Tenneco is a $4.7 billion manufacturing company with headquarters in Lake Forest, Illinois and approximately 19,000 employees worldwide. Tenneco is one of the world’s largest designers, manufacturers and marketers of emission control and ride control products and systems for the automotive original equipment market and the aftermarket. Tenneco markets its products principally under the Monroe®, Walker®, Gillet™ and Clevite®Elastomer brand names.
CONTACT:
Tenneco Media Relations
Jane Ostrander
(1) 847 482 5607
jostrander@tenneco.com
Tenneco Investor Relations
Leslie Hunziker
(1) 847 482 5042
lhunziker@tenneco.com
Back
2018
Lake Forest, Illinois, September 20, 2007 – Tenneco Inc. (NYSE: TEN) announced today its intention to close its Wissembourg, France manufacturing facility, which produces emission control products for original equipment manufacturers. The company will consult with work councils and local government authorities on the intended closure and potential impact of this announcement on the approximately 180 people employed at the facility.
Tenneco continues to look for opportunities to improve operating efficiency and optimize its global manufacturing footprint by matching production capacity to customer demand. The intended closure of the Wissembourg facility is designed to reduce production overcapacity in the region.
The company will implement any potential workforce reductions that may occur as a result of this plan in compliance with all applicable legal and contractual requirements including consulting with work councils and other employee representatives.
The potential closure is dependent on discussions with employee work councils and, if completed, Tenneco expects it would take up to a $17 million restructuring charge, beginning as early as the fourth quarter 2007 and through 2008.
Tenneco is a $4.7 billion manufacturing company with headquarters in Lake Forest, Illinois and approximately 19,000 employees worldwide. Tenneco is one of the world’s largest designers, manufacturers and marketers of emission control and ride control products and systems for the automotive original equipment market and the aftermarket. Tenneco markets its products principally under the Monroe®, Walker®, Gillet™ and Clevite®Elastomer brand names.
CONTACT:
Tenneco Media Relations
Jane Ostrander
(1) 847 482 5607
jostrander@tenneco.com
Tenneco Investor Relations
Leslie Hunziker
(1) 847 482 5042
lhunziker@tenneco.com
Back
2017
Lake Forest, Illinois, September 20, 2007 – Tenneco Inc. (NYSE: TEN) announced today its intention to close its Wissembourg, France manufacturing facility, which produces emission control products for original equipment manufacturers. The company will consult with work councils and local government authorities on the intended closure and potential impact of this announcement on the approximately 180 people employed at the facility.
Tenneco continues to look for opportunities to improve operating efficiency and optimize its global manufacturing footprint by matching production capacity to customer demand. The intended closure of the Wissembourg facility is designed to reduce production overcapacity in the region.
The company will implement any potential workforce reductions that may occur as a result of this plan in compliance with all applicable legal and contractual requirements including consulting with work councils and other employee representatives.
The potential closure is dependent on discussions with employee work councils and, if completed, Tenneco expects it would take up to a $17 million restructuring charge, beginning as early as the fourth quarter 2007 and through 2008.
Tenneco is a $4.7 billion manufacturing company with headquarters in Lake Forest, Illinois and approximately 19,000 employees worldwide. Tenneco is one of the world’s largest designers, manufacturers and marketers of emission control and ride control products and systems for the automotive original equipment market and the aftermarket. Tenneco markets its products principally under the Monroe®, Walker®, Gillet™ and Clevite®Elastomer brand names.
CONTACT:
Tenneco Media Relations
Jane Ostrander
(1) 847 482 5607
jostrander@tenneco.com
Tenneco Investor Relations
Leslie Hunziker
(1) 847 482 5042
lhunziker@tenneco.com
Back
2016
Lake Forest, Illinois, September 20, 2007 – Tenneco Inc. (NYSE: TEN) announced today its intention to close its Wissembourg, France manufacturing facility, which produces emission control products for original equipment manufacturers. The company will consult with work councils and local government authorities on the intended closure and potential impact of this announcement on the approximately 180 people employed at the facility.
Tenneco continues to look for opportunities to improve operating efficiency and optimize its global manufacturing footprint by matching production capacity to customer demand. The intended closure of the Wissembourg facility is designed to reduce production overcapacity in the region.
The company will implement any potential workforce reductions that may occur as a result of this plan in compliance with all applicable legal and contractual requirements including consulting with work councils and other employee representatives.
The potential closure is dependent on discussions with employee work councils and, if completed, Tenneco expects it would take up to a $17 million restructuring charge, beginning as early as the fourth quarter 2007 and through 2008.
Tenneco is a $4.7 billion manufacturing company with headquarters in Lake Forest, Illinois and approximately 19,000 employees worldwide. Tenneco is one of the world’s largest designers, manufacturers and marketers of emission control and ride control products and systems for the automotive original equipment market and the aftermarket. Tenneco markets its products principally under the Monroe®, Walker®, Gillet™ and Clevite®Elastomer brand names.
CONTACT:
Tenneco Media Relations
Jane Ostrander
(1) 847 482 5607
jostrander@tenneco.com
Tenneco Investor Relations
Leslie Hunziker
(1) 847 482 5042
lhunziker@tenneco.com
Back
2015
Lake Forest, Illinois, September 20, 2007 – Tenneco Inc. (NYSE: TEN) announced today its intention to close its Wissembourg, France manufacturing facility, which produces emission control products for original equipment manufacturers. The company will consult with work councils and local government authorities on the intended closure and potential impact of this announcement on the approximately 180 people employed at the facility.
Tenneco continues to look for opportunities to improve operating efficiency and optimize its global manufacturing footprint by matching production capacity to customer demand. The intended closure of the Wissembourg facility is designed to reduce production overcapacity in the region.
The company will implement any potential workforce reductions that may occur as a result of this plan in compliance with all applicable legal and contractual requirements including consulting with work councils and other employee representatives.
The potential closure is dependent on discussions with employee work councils and, if completed, Tenneco expects it would take up to a $17 million restructuring charge, beginning as early as the fourth quarter 2007 and through 2008.
Tenneco is a $4.7 billion manufacturing company with headquarters in Lake Forest, Illinois and approximately 19,000 employees worldwide. Tenneco is one of the world’s largest designers, manufacturers and marketers of emission control and ride control products and systems for the automotive original equipment market and the aftermarket. Tenneco markets its products principally under the Monroe®, Walker®, Gillet™ and Clevite®Elastomer brand names.
CONTACT:
Tenneco Media Relations
Jane Ostrander
(1) 847 482 5607
jostrander@tenneco.com
Tenneco Investor Relations
Leslie Hunziker
(1) 847 482 5042
lhunziker@tenneco.com
Back
