News from 2015 - 2017

  1. Tenneco
  2. 2019 - 2015 News Archive

Disclaimer

These press releases may contain certain forward-looking statements that are subject to known and unknown risks and uncertainties that could cause actual results to differ materially from those expressed or implied by such statements. Such risks and uncertainties include, but are not limited to the risk factors noted in the press releases and Tenneco's filings with the Securities and Exchange Commission on Form 10-K and Form 10-Q. All press releases are current only as of the date specified. Tenneco disclaims any obligation to update or correct press releases as the result of financial, business or any other developments occurring after the specified date.

 

2019

Tenneco Emissions Technology Expert Among Featured Speakers At 2013 International Workboat Show

October 4, 2013
 
Lake Forest, IL October 4, 2013 – Tenneco Inc. (NYSE:TEN) announced today that Tom Spinks, Clean Air business development manager, will present at the upcoming 2013 International Workboat Show in New Orleans. Presenting with Spinks will be Mark Masor, manager, Gulf Coast operations for Gibbs & Cox.
 
Spinks and Masor will be part of a session titled "Complying with New Emission Regulations." The 90-minute session, scheduled for Thursday, October 10, at 2 p.m., will focus on upcoming EPA Tier 4 and IMO Tier III regulations. As part of the session, Spinks and Masor will discuss ways to integrate the required aftertreatment technology into vessel design to best achieve pending reductions in government-mandated emissions levels.
 
Tenneco’s exhibit, located in the Morial Convention Center, booth 3920, will feature a version of Tenneco’s proprietary XNOx™ SCR aftertreatment system for NOx abatement specifically developed for the marine industry.
 
Interview opportunities are available on site or in advance of the conference. Please contact the press contacts listed below to schedule an interview.
 
Tenneco is a $7.4 billion global manufacturing company with headquarters in Lake Forest, Illinois and approximately 25,000 employees worldwide. Tenneco is one of the world’s largest designers, manufacturers and marketers of clean air and ride performance products and systems for automotive and commercial vehicle original equipment markets and the aftermarket. Tenneco’s principal brand names are Monroe®, Walker®, XNOx™ and Clevite®Elastomer.
  
Contacts:
Mike Alzamora
Media Inquiries
847 482-5241
malzamora@tenneco.com
 
Linae Golla
Investor inquiries
847 482-5162
lgolla@tenneco.com
 
 
Back

2018

Tenneco Emissions Technology Expert Among Featured Speakers At 2013 International Workboat Show

October 4, 2013
 
Lake Forest, IL October 4, 2013 – Tenneco Inc. (NYSE:TEN) announced today that Tom Spinks, Clean Air business development manager, will present at the upcoming 2013 International Workboat Show in New Orleans. Presenting with Spinks will be Mark Masor, manager, Gulf Coast operations for Gibbs & Cox.
 
Spinks and Masor will be part of a session titled "Complying with New Emission Regulations." The 90-minute session, scheduled for Thursday, October 10, at 2 p.m., will focus on upcoming EPA Tier 4 and IMO Tier III regulations. As part of the session, Spinks and Masor will discuss ways to integrate the required aftertreatment technology into vessel design to best achieve pending reductions in government-mandated emissions levels.
 
Tenneco’s exhibit, located in the Morial Convention Center, booth 3920, will feature a version of Tenneco’s proprietary XNOx™ SCR aftertreatment system for NOx abatement specifically developed for the marine industry.
 
Interview opportunities are available on site or in advance of the conference. Please contact the press contacts listed below to schedule an interview.
 
Tenneco is a $7.4 billion global manufacturing company with headquarters in Lake Forest, Illinois and approximately 25,000 employees worldwide. Tenneco is one of the world’s largest designers, manufacturers and marketers of clean air and ride performance products and systems for automotive and commercial vehicle original equipment markets and the aftermarket. Tenneco’s principal brand names are Monroe®, Walker®, XNOx™ and Clevite®Elastomer.
  
Contacts:
Mike Alzamora
Media Inquiries
847 482-5241
malzamora@tenneco.com
 
Linae Golla
Investor inquiries
847 482-5162
lgolla@tenneco.com
 
 
Back

2017

Tenneco Emissions Technology Expert Among Featured Speakers At 2013 International Workboat Show

October 4, 2013
 
Lake Forest, IL October 4, 2013 – Tenneco Inc. (NYSE:TEN) announced today that Tom Spinks, Clean Air business development manager, will present at the upcoming 2013 International Workboat Show in New Orleans. Presenting with Spinks will be Mark Masor, manager, Gulf Coast operations for Gibbs & Cox.
 
Spinks and Masor will be part of a session titled "Complying with New Emission Regulations." The 90-minute session, scheduled for Thursday, October 10, at 2 p.m., will focus on upcoming EPA Tier 4 and IMO Tier III regulations. As part of the session, Spinks and Masor will discuss ways to integrate the required aftertreatment technology into vessel design to best achieve pending reductions in government-mandated emissions levels.
 
Tenneco’s exhibit, located in the Morial Convention Center, booth 3920, will feature a version of Tenneco’s proprietary XNOx™ SCR aftertreatment system for NOx abatement specifically developed for the marine industry.
 
Interview opportunities are available on site or in advance of the conference. Please contact the press contacts listed below to schedule an interview.
 
Tenneco is a $7.4 billion global manufacturing company with headquarters in Lake Forest, Illinois and approximately 25,000 employees worldwide. Tenneco is one of the world’s largest designers, manufacturers and marketers of clean air and ride performance products and systems for automotive and commercial vehicle original equipment markets and the aftermarket. Tenneco’s principal brand names are Monroe®, Walker®, XNOx™ and Clevite®Elastomer.
  
Contacts:
Mike Alzamora
Media Inquiries
847 482-5241
malzamora@tenneco.com
 
Linae Golla
Investor inquiries
847 482-5162
lgolla@tenneco.com
 
 
Back

2016

Tenneco Emissions Technology Expert Among Featured Speakers At 2013 International Workboat Show

October 4, 2013
 
Lake Forest, IL October 4, 2013 – Tenneco Inc. (NYSE:TEN) announced today that Tom Spinks, Clean Air business development manager, will present at the upcoming 2013 International Workboat Show in New Orleans. Presenting with Spinks will be Mark Masor, manager, Gulf Coast operations for Gibbs & Cox.
 
Spinks and Masor will be part of a session titled "Complying with New Emission Regulations." The 90-minute session, scheduled for Thursday, October 10, at 2 p.m., will focus on upcoming EPA Tier 4 and IMO Tier III regulations. As part of the session, Spinks and Masor will discuss ways to integrate the required aftertreatment technology into vessel design to best achieve pending reductions in government-mandated emissions levels.
 
Tenneco’s exhibit, located in the Morial Convention Center, booth 3920, will feature a version of Tenneco’s proprietary XNOx™ SCR aftertreatment system for NOx abatement specifically developed for the marine industry.
 
Interview opportunities are available on site or in advance of the conference. Please contact the press contacts listed below to schedule an interview.
 
Tenneco is a $7.4 billion global manufacturing company with headquarters in Lake Forest, Illinois and approximately 25,000 employees worldwide. Tenneco is one of the world’s largest designers, manufacturers and marketers of clean air and ride performance products and systems for automotive and commercial vehicle original equipment markets and the aftermarket. Tenneco’s principal brand names are Monroe®, Walker®, XNOx™ and Clevite®Elastomer.
  
Contacts:
Mike Alzamora
Media Inquiries
847 482-5241
malzamora@tenneco.com
 
Linae Golla
Investor inquiries
847 482-5162
lgolla@tenneco.com
 
 
Back

2015

Tenneco Emissions Technology Expert Among Featured Speakers At 2013 International Workboat Show

October 4, 2013
 
Lake Forest, IL October 4, 2013 – Tenneco Inc. (NYSE:TEN) announced today that Tom Spinks, Clean Air business development manager, will present at the upcoming 2013 International Workboat Show in New Orleans. Presenting with Spinks will be Mark Masor, manager, Gulf Coast operations for Gibbs & Cox.
 
Spinks and Masor will be part of a session titled "Complying with New Emission Regulations." The 90-minute session, scheduled for Thursday, October 10, at 2 p.m., will focus on upcoming EPA Tier 4 and IMO Tier III regulations. As part of the session, Spinks and Masor will discuss ways to integrate the required aftertreatment technology into vessel design to best achieve pending reductions in government-mandated emissions levels.
 
Tenneco’s exhibit, located in the Morial Convention Center, booth 3920, will feature a version of Tenneco’s proprietary XNOx™ SCR aftertreatment system for NOx abatement specifically developed for the marine industry.
 
Interview opportunities are available on site or in advance of the conference. Please contact the press contacts listed below to schedule an interview.
 
Tenneco is a $7.4 billion global manufacturing company with headquarters in Lake Forest, Illinois and approximately 25,000 employees worldwide. Tenneco is one of the world’s largest designers, manufacturers and marketers of clean air and ride performance products and systems for automotive and commercial vehicle original equipment markets and the aftermarket. Tenneco’s principal brand names are Monroe®, Walker®, XNOx™ and Clevite®Elastomer.
  
Contacts:
Mike Alzamora
Media Inquiries
847 482-5241
malzamora@tenneco.com
 
Linae Golla
Investor inquiries
847 482-5162
lgolla@tenneco.com
 
 
Back